EasyPSV® Permanent Etch

The Hassle Free Etch Effect

EasyPSV Etch promises a clean and classic look that resembles sandblasted or etched glass.

EasyPSV Permanent Etch Applies To:

  • Glass/mirror
  • Wood
  • Plastic
  • Metal
  • Ceramic
Clear
SKU: N/A Category:

Description

Put down the heavy sandblaster and step away from the messy etching cream! EasyPSV Etch only needs your craft cutter and application tape to complete any and all of your glass or mirror projects. Etch’s smooth finish is complimented with a slight metallic dusting that allows the EasyPSV to be translucent enough to see the color of the decorated object, but also opaque enough to be distinctive. Place EasyPSV Etch on black surfaces for a wicked cool decal or watch as the sun illuminates it through your window. The permanent adhesive of EasyPSV Etch allows it to last for years and years. So when you use EasyPSV Etch you know you have a frosted look that won’t flake!

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Vinyl
Brother Scan N Cut DX: Blade: Standard, 3  Cut Speed: 1  Cut Pressure: 2
Silhouette Cameo 4: Blade: AutoBlade, 2  Material: Vinyl, Glossy  Force: 7  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 50-55  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 50  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 3  Cut Speed: 1  Cut Pressure: 2

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Additional information

Weight N/A
Dimensions N/A
Roll Width

12", 24", 48"

Roll yards

1yd, 5yd, 10yd, 25yd, 50yd

Application instructions
• Place EasyPSV with the liner side down and cut your design. (DO NOT reverse/mirror your design)
• Weed excess vinyl
• Remove the application tape’s paper liner. Place tape on top of EasyPSV and burnish with a squeegee
• Lift the application tape and EasyPSV away from the paper liner to expose the removable adhesive
• Place the application tape on your desired object and burnish with a squeegee to fully adhere the design
• Gently peel away the application tape, leaving just your EasyPSV design on the object

Surface prep instructions
For best adhesion, remove any dirt, dust, grease, etc to prepare the surface you want to decorate with EasyPSV. The following cleaning method is not recommended for porous surfaces such as unfinished/untreated wood. It is recommended that all other surfaces be spot tested with care before cleaning the entire application area.

Non-porous surfaces can be cleaned with a mix of approximately 2 parts water and 1 part isopropyl alcohol (70% or higher for best results) or non-amonia based window cleaner. Use a microfiber or lint free towel to clean the application area with the mixture. Paper towel is not recommended since it will leave behind small bits of paper that can become trapped under the EasyPSV during application. Ensure the area is completely dry before applying.

*The cleaning method outlined above is subject to modification and not always suitable for every substrate.

The purchaser should independently determine with their own testing to use this method or not on a case by case basis.

 

Removal instructions
If the EasyPSV peels up, but leaves an adhesive residue use an adhesive remover to clean the area. If the EasyPSV is stubbornly sticking, the heat from a hair dryer or garment steamer can help loosen the adhesive. However, heating is not recommended for glass due to possible shattering. To remove Permanent EasyPSV from glass, saturate the decal with soap and water. Cover with plastic wrap and let sit for a few hours before attempting to remove. An adhesive remover may still be required to clean all adhesive from the surface after removing the EasyPSV.

*The removal instructions outlined above are subject to modification and not always suitable for every substrate.

The purchaser should independently determine with their own testing to use this method or not on a case by case basis.

Not recommended for use on painted drywall. Not recommended for use near flame/heat source. Not microwave or dishwasher safe.

514 664-2013 info@grafikexperts.com 2000, St-Regis Dorval, QC Canada