EasyWeed® Adhesive

The All Purpose Heat Transfer Adhesive

Shining statements, multicolor combinations, and no sew projects can all be achieved with EasyWeed Adhesive!

EasyWeed Adhesive is 75 Microns / 2.95 Mils and is a PET Composition.

EasyWeed Adhesive Applies To:

  • 100% cotton
  • 100% polyester
  • Poly/cotton blends

 

Clear
SKU: N/A Category:

Description

Compatible with cost-effective screen printing foils and other materials that lend themselves to adhesion, this adhesive is a money saver and a money maker! Even on its own, EasyWeed Adhesive creates a glazed tone on tone appearance that’s trending. The milky colored adhesive features a pressure sensitive carrier and low application temperature that’s gentle enough for almost all heat sensitive fabrics. Cutting EasyWeed Adhesive is like any other EasyWeed product with the shiny, carrier side face down and image mirrored. For best visibility while weeding, we suggest placing the adhesive on a dark surface.

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 5-6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 70-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 7-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 80  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Additional information

Weight 1 kg
Dimensions 1 × 3 × 4 cm
Roll Width

12"

Roll yards

5yd, 10yd, 25yd, 50yd

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot
Application Instructions (heat press)

• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C
• Use medium pressure for 5-10 seconds
• Peel carrier hot
  • Wait 24 hours before first wash
  • Machine wash warm or cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting
514 664-2013 info@grafikexperts.com 2000, St-Regis Dorval, QC Canada