EasyWeed® Fluorescent

The most trusted heat transfer vinyl brand in the world

Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage!

EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.

EasyWeed Fluorescent Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather

Clear
SKU: N/A Category:

Description

EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that’s great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 8-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 80  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Additional information

Weight N/A
Dimensions N/A
Roll Width

12", 15", 20"

Roll yards

1yd, 5yd, 10yd, 25yd, 50yd

Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
  • Wait 24 hours before first wash
  • Machine wash warm or cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting
514 664-2013 info@grafikexperts.com 2000, St-Regis Dorval, QC Canada