EasyWeed® Glow

Fast Shipping Policy Facts:

  • Done Added as extra charge
  • Done UPS is our official carrier
  • Done Next day ground service option only (for now)

Description

EasyWeed Glow looks great in the daylight and glows in the dark! This polyurethane heat transfer vinyl is available in white and glows green! It cuts and weeds like our popular EasyWeed heat transfer vinyl. To get the glow effect, “charge” the material by exposing it to sunlight. The more light you give it, the brighter and longer it glows in the dark! Glow is great for crafters looking to create costumes, candy bags, and cool blanket forts that shine at bedtime. EasyWeed Glow can even be layered on other Siser® materials for an awesome look. Layering EasyWeed Glow on top of white EasyWeed lets you create hidden messages and effects that reveal themselves in the dark!

EasyWeed Glow is CPSIA Certified so even your little ones can get in on the glow in the dark fun!

EasyWeed Glow Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather

Cutter Settings

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 8-9  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 80-85  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 80  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Application Instructions

For Home Iron

  1. Set iron dial between Cotton and Linen
  2. Cover with Multipurpose paper or Heat Transfer Cover Sheet
  3. Place on flat, hard surface (ironing board not recommended)
  4. Press iron with medium/firm pressure (do not slide iron)
  5. Press each section of design for 10-15 seconds
  6. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  7. Peel carrier hot or cold

For Heat Press

  1. Cover design with Multipurpose paper or Heat Transfer Cover Sheet
  2. Preheat garment for 2-3 seconds
  3. Apply design at 305°F/150°C
  4. Use medium pressure for 10-15 seconds
  5. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  6. Peel carrier hot or cold

Care Instructions

  • Wait 24 hours before first wash
  • Machine wash warm or cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting

Videos