Holographic

A new dimension in heat transfer vinyl!

Holographic contains color changing chips that create the effect of depth and dimension.

Holographic is 110 Microns / 4.3 Mils and is a Polyester composition.

Holographic Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather

 

Clear
SKU: N/A Category:

Description

Available in several special effect colors and finishes, Holographic will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with applying rhinestone designs. The Holographic line also features a translucent color: Rainbow Pearl. Rainbow Pearl is unlike any other material, giving your designs an opalescent finish that changes depending on the color of the garment.

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Light Cardstock
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Light Cardstock
Brother Scan N Cut DX: Blade: 3  Cut Speed: 5  Cut Pressure: 5
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 14  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 150-190  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 17  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 75-80  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 120  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 3  Cut Speed: 5  Cut Pressure: 5

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Additional information

Weight N/A
Dimensions N/A
Roll Width

20"

Roll yards

1yd, 5yd, 10yd, 25yd, 50yd

Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
  • Wait 24 hours before first wash
  • Machine wash warm or cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal setting
514 664-2013 info@grafikexperts.com 2000, St-Regis Dorval, QC Canada