Metal

Metallic Style Without the Weight!

Dazzle customers with this precious metal HTV!

Metal is 100 Microns / 3.9 Mils and is a PET composition.

Metal Applies To:

  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends

Clear
SKU: N/A Category:

Description

Metal HTV features a smooth finish, soft hand, and a brushed metal appearance that can be washed and worn without becoming lackluster. Unlike other metallic heat transfers, Metal HTV is super light-weight so you can wear it on almost anything. This fashion forward material is ideal for bridal parties, spirit wear, cheer, dance, and any occasion that needs a gleaming touch! Use in conjunction with other materials such as EasyWeed or StripFlock for awesome designs that hit on multiple levels! Metal is layerable as a TOP LAYER ONLY.

Cricut Explore Air: Blade: AutoBlade, Standard  Setting: Vinyl +
Cricut Maker: Blade: AutoBlade, Fine-Point  Setting: Heat Transfer (Non-Cricut)
Brother Scan N Cut DX: Blade: AutoBlade  Cut Speed: 5  Half Cut: Auto
Silhouette Cameo 4: Blade: AutoBlade, 3  Material: Heat Transfer, Smooth  Force: 6  Speed: 8
Roland GX/GS-24: Blade: 45°  Gram Force: 80-90  Offset: .250  Speed: 30-50 cm/s
Graphtec: Blade: 45°  Gram Force: 9-10  Tool: CBO9U+0  Speed: 30 cm/s
US Cutter Titan 2 & 3: Blade: 45°/60°  Gram Force: 65-70  Speed: 300 mm/s  **Blade Advancing Varies
Mimaki CG-60SR III: Blade: 45° Gram Force: 110  Offset: 30  Speed: 20-30 cm/s
Brother Scan N Cut: Blade: Standard, 2  Cut Speed: 5  Cut Pressure: 1

The specifications listed are suggested starting points that may need to be adjusted according to blade, cutting strip and cutting mat wear. Always perform a test cut prior to cutting designs.

*Craft cutters were evaluated using cutter-specific standard grip cutting mats.

Additional information

Weight N/A
Dimensions N/A
Roll Width

20"

Roll yards

1yd, 5yd, 10yd, 25yd, 50yd

Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
  • Wait 24 hours before first wash
  • Machine wash cold with mild detergent
  • Do not bleach or dry clean
  • Dry on low setting
514 664-2013 info@grafikexperts.com 2000, St-Regis Dorval, QC Canada